Labconco 5220200 HEPA Filtered Glove Box

Condition: New Brand new item from stock or on order from manufacturer
1 YEAR MANUFACTURER'S WARRANTY
Alternate Names:
Anerobic Chamber
Stock #:
N2167
Dimensions (approx.):
Interior Working Width: 33.5" (inside)
52.7 x 31.6 x 40"H (outside)
Electrical:
Specify 115 or 230 Volts, 50/60 Hz,
Product Description
Precise HEPA-Filtered Glove Boxes have inlet and outlet HEPA filters and provide a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders. These boxes have uses in pharmaceutical research, nanotechnology and biochemistry. Microorganisms, low-level radiochemicals, chemical carcinogens and asbestos may also be used in these boxes.

These boxes may be used for cleanroom applications requiring ISO Class 3 (ISO 14644-1) conditions. Labconco HEPA Filtered Glove Boxes may be appropriate for use as containment isolators for applications involving compounds assigned ISO 4 and ISO 5 Banding Levels. Contact your Health and Safety Officer for specific Engineered Containment Device requirements.

Liner Material: Polyethylene
Number of Glove Ports: Two
Primary Application: Hazardous materials

FEATURES:
- One-piece molded, medium-density polyethylene shell. Labconco recommends this website for a comprehensive listing of chemical resistance data for polyethylene.
- Dry powder epoxy-coated steel superstructure
- 1/4" thick laminated safety glass viewing window, 26.4" wide x 12.5" high, removable for loading equipment, with powder-coated steel frame and neoprene gasket
- Space-saving inner and outer transfer chamber doors that pivot upward, are counterbalanced and equipped with quick-latches
- Black, chemical-resistant work surface sealed to the glove box floor
- Interior ceiling-mounted electrical duplex receptacle with 5 amp maximum circuit load
- Neoprene gloves, size 9 3/4", are included.
- Built-in blower with speed control capable of airflow from 13 CFM to 75 CFM.
- Fluorescent lamp, 22 watts, with easy replacement from the top
- Switches for light, blower and innermost interior electrical receptacle
- Inlet and outlet HEPA filters, 99.99% efficient on 0.3 micron particulates
- Test port for challenging HEPA filter integrity
- Main chamber static pressure gauge for monitoring HEPA filter loading.
- Approximately 13 cubic feet of interior space in main chamber
- 11.0" nominal ID x 12.0" long transfer chamber
- Factory leak tested with a mass spectrometer while glove box is pressurized with helium at 5 inches of water gauge.
- No detectable leaks greater than 1 x 10(-3) ml/sec
- Meet Class 1 atmosphere containment conditions for oxygen leak rates per ISO 10648-2 test method
- Transfer chamber interior interlocking shelf of dry powder epoxy-coated steel
- 0.05 ppm average tracer gas levels or less detected during perimeter scan testing (surpasses ASHRAE 110 standards)
- Airborne particulate cleanliness (measured under positive and negative pressures per ISO 14644-1 test method) exceeds ISO Class 5 conditions (equivalent to Class 100) and achieved ISO Class 3 conditions (equivalent to Class 1) at both minimum and maximum operational airflow volumes
- Vibration less than 1.5 x 10(-5) inches displacement measured at the work surface at both minimum and maximum airflow volumes

Required Accessories
- Adjustable Height Base Stands
- Base Cabinet
- Work Surface

Optional Accessories
- Acrylic Viewing Window
- Add-A-Valve Kit
- Anti-Static Ionizer Fan
- Balance Vibration Isolator
- Blower Foot Switch
- Complete Valve Set
- Diaphragm Pumps
- Electrical Power Strips
- Exterior Transfer Chamber Shelf
- External Glove Port Covers
- FilterMate Portable Exhausters
- Gloves and Glove Box Accessories
- Hanging Shelf Accessories
- Positive Pressure Conversion Kit
- Recirculation Kit
- Remote Blowers
- Storage Shelf Kits
- Trap Inserts
- Waste Chute

There are international electrical configurations available.
Made in USA.
This item ships from Kansas City, MO.
Looking for a specific close-up? Contact Us
Request a Free Quote Right Now
Please fill in the form below to get a quote for the Labconco 5220200 HEPA Filtered Glove Box:
Captcha
 

Categories

Analytical Instruments / Chemistry lab apparatus
chromatographs, calorimeters, evaporators, fluorometers, hydrogenators, osmometers, polarimeters, spectrophotometers, titrators, meters for pH / conductivity / dissolved solids / ORP ... and much more...

Biology / Microbiology laboratory apparatus
bioreactors, cell disrupters, cell harvesters, cryostats, digesters, freeze-dryers / lyophilizers, growth chambers, homogenizers, hybridization, incubators, microscopes, osmometers, spiral platers, sterilizers ... and much more ...

General Use laboratory apparatus
balances, baths, blenders, centrifuges, chart recorders, freezers, fume hoods, furnaces, glassware washers, glove boxes, mixers, moisture testing, ovens, pumps, shakers, vacuum equipment, water purification ... and much more ...

Medical / Clinical laboratory apparatus
anaerobic incubators, autoclaves, blood testing, cell counters, CO2 incubators, cryostats, electrolyte analyzers, electrophoresis, glove boxes, microtomes, sterilizers, ... and much more ...

Petroleum Products and Biofuel lab apparatus
baths, calorimeters, color measurement, density meters, flash point, hydrogenators, oil testing, penetrometers, surface tension, vapor pressure, viscometers and rheometers, ... and much more ...

Pharmaceutical laboratory apparatus
stability chambers, tablet disintegration, tablet dissolution, tablet hardness, V-blenders, ... and much more ...

Materials Testing / Physical Properties / Metallurgical lab apparatus
abrasion, color measurement, environmental chambers, gloss / reflectance, hardness, impact testers, melt point, particle size, paint testers, penetrometers, sieve shakers, tensile strength, viscometers ... and much more ...