Fischer Technical LAV3G with gauge Rotary vane Vacuum Pump

Condition: New Brand new item from stock or on order from manufacturer
1 YEAR MANUFACTURER'S WARRANTY
Stock #:
N836
Dimensions (approx.):
14 in.W x 5.25 in.D x 11 in.H (outside)
Electrical:
specify 120 or 220 Volts, 50/60 Hz,
Product Description
A high vacuum pump, capable of free air displacement of 85 liters per minute (3 cubic feet per minute), and an ultimate vacuum of 25 microns/laboratory conditions.

This rotary vane style high vacuum pump is a two-stage pump with a rotary sliding vane that is capable of producing up to 85 liters per minute (3 cubic feet per minute) of free air displacement. As a direct drive pump, the space needed to house the pump is vastly reduced, and its gas ballast helps to purge moisture from the vacuum system. It features a trap, which greatly reduces the risk of oil being sucked back into the system, if properly maintained.

It has an operating temperature of 30-170F, with an overall oil capacity of 27 ounces (785cc). The pump features a 1/2 horsepower 110V/60Hz motor, capable of generating a pump speed of up to 1725RPM. This model also comes standard with a 2.5 in. diameter, 0 to -30 in. Hg Bourdon-type steel case vacuum gauge that has been securely mounted to the intake valve.

A vacuum pump works in conjunction with a vacuum pump plate to create a partial vacuum inside a container placed open end down on the plate. More than one pump can be used on a project, either in series or in parallel. The direct drive, rotary vane vacuum pump is a positive displacement pump, and is the most commonly used vacuum pump. It has a number of vanes that are mounted to a rotor that rotates within a cavity of the pump, pumping air out of the container to create a partial vacuum.

This vacuum pump ships directly from the manufacturer, and are warrantied to be free of defects in both workmanship and materials by the manufacturer for a period of one year.

Specifications:
Free Air Displacement: 85L/minute (3 CFM)
Ultimate Vacuum: 25 microns/laboratory conditions
Pump Speed: 1725 RPM
Oil Capacity: 27oz (785cc)
Intake Port: 3/8 in. OD for 3/8 in. ID Tubing

These pumps are not chemically resistant.
Made in USA.
This item ships from Roselle, IL.
Looking for a specific close-up? Contact Us
Request a Free Quote Right Now
Please fill in the form below to get a quote for the Fischer Technical LAV3G with gauge Rotary vane Vacuum Pump:
Captcha
 

Categories

Analytical Instruments / Chemistry lab apparatus
chromatographs, calorimeters, evaporators, fluorometers, hydrogenators, osmometers, polarimeters, spectrophotometers, titrators, meters for pH / conductivity / dissolved solids / ORP ... and much more...

Biology / Microbiology laboratory apparatus
bioreactors, cell disrupters, cell harvesters, cryostats, digesters, freeze-dryers / lyophilizers, growth chambers, homogenizers, hybridization, incubators, microscopes, osmometers, spiral platers, sterilizers ... and much more ...

General Use laboratory apparatus
balances, baths, blenders, centrifuges, chart recorders, freezers, fume hoods, furnaces, glassware washers, glove boxes, mixers, moisture testing, ovens, pumps, shakers, vacuum equipment, water purification ... and much more ...

Medical / Clinical laboratory apparatus
anaerobic incubators, autoclaves, blood testing, cell counters, CO2 incubators, cryostats, electrolyte analyzers, electrophoresis, glove boxes, microtomes, sterilizers, ... and much more ...

Petroleum Products and Biofuel lab apparatus
baths, calorimeters, color measurement, density meters, flash point, hydrogenators, oil testing, penetrometers, surface tension, vapor pressure, viscometers and rheometers, ... and much more ...

Pharmaceutical laboratory apparatus
stability chambers, tablet disintegration, tablet dissolution, tablet hardness, V-blenders, ... and much more ...

Materials Testing / Physical Properties / Metallurgical lab apparatus
abrasion, color measurement, environmental chambers, gloss / reflectance, hardness, impact testers, melt point, particle size, paint testers, penetrometers, sieve shakers, tensile strength, viscometers ... and much more ...