Of all the water purification technologies available, distillation can remove a wider range of impurities than any other single form of water purification. LabStrong Fi-Streem Stills consistently produce high quality ASTM Type II water and can remove inorganic ions, dissolved gasses, organics, particles, bacteria and pyrogens from water. LabStrong Fi-Streem Water Stills will meet your laboratory water needs while remaining budget-friendly.
The LabStrong Fi-Streem III Still consistently produces high quality ASTM Type II water. The still produces four liters of distilled water per hour.
Consistently Pure Water
The still consistently produces high quality ASTM Type II water and can remove inorganic ions, dissolved gasses, organics, particles, bacteria and pyrogens from water. The still features a unique patented vapor trap designed to eliminate all vapor borne droplets, ensuring there is no carry-over of impurities in the distillate water. The resultant is pyrogen free water at all times. Glass components in the still eliminate leaching impurities.
Multiple safety features protect the still and the user. A thermistor and over temperature protection device in the boiler assembly offers double protection against low water conditions. The base of the still is designed to contain accidental leaks within the still. The totally enclosed still design assures operator safety from breakage and hot surfaces.
Reliable and Effortless to Use
The still features user friendly operation. With the press of a single button, the still is operational. With the press of two buttons the still is in the clean mode. Fully automatic microprocessor controls simplify operation and cleaning while assuring high reliability.
The still is supplied with a float switch which shuts off the still automatically when the water storage reservoir is full, enabling safe and unattended operation. The 24-hour automatic control activates the still as required to maintain a full reservoir. The automatic control start/stop feature is enabled when the still is connected to the LabStrong 20 Liter Carboy (request pricing), LabStrong 50 Liter Carboy (request pricing), or LabStrong 40 Liter Storage Tank (request pricing) via the float switch.
Highly Efficient and Economical
Multiple pretreatment options are available for the still that can produce 1 Liter of distilled water from 1.1 Liters of pretreated water. The pretreatment also helps to reduce the frequency of cleaning the still by removing scaling impurities from the inlet source water.
The optimal power design increases output with fewer watts and a built-in flow controller maximizes product water output while minimizing inlet water usage to drain. The still can be conveniently turned off for extended periods of time and returned to operation without the need for sanitizing or replacing consumables. Not only does this feature save valuable time, but also resources.
Simple to Clean
Descaling of the still is simplified by a cleaning process that does not require the dismantling of any glassware. The process requires little operator time and is easy to complete. The microprocessor and thermistor controlled operation incorporates a dual flush program to ensure the still is ready to return to normal operation following a clean cycle.
Space Saving Design
Included with the still is a wall mount bracket, which allows for wall mounting. The still can be bench mounted. The still takes up 25% less bench top space than competitors.
Easy to Install
The still does not require pretesting or prequalification of water prior to installing. The still can simply be connected to tap water and operate. For convenience, the still is designed with dual feed capabilities for tap or pretreated feedwater. All of the necessary tubing is included with the still to complete installation.
Feed Water Type: Tap or Pretreated
Feed Water Inlet: 1/2" ID Tubing
Feed Water Operational Temperature Range: 40° to 120°F
Feed Water Cooling Water Temperature: 40° to 86°F
Cooling Water (Liters Per Hour): 60
Product Water Capacity (Liters Per Hour): 4
Physical Dimensions (Length x Width x Height): 14.75 x 10.25 x 29.5 inches
Operating Weight: 46 pounds
Feed Water Minimum Pressure: 10 PSI
Feed Water Maximum Pressure: 80 PSI
Certification: CSA, cCSAus and CE
Common Applications for Distilled Water:
Bacteria and pyrogen removal
Buffer and reagent preparation
Feed water for Type 1 Ultrapure Water Systems
General laboratory equipment feed (i.e. humidification, environmental chambers, autoclaves and dishwashers)
Glassware rinsing and washing
Protocols specifically requiring glass distilled water
Solid phase extraction
Trace metal detection
Top off lead acid batteries
Water analysis (i.e. BOD, COD, TOC, TOD, pH value tests)
The following link provides additional information from the instruction manual or original manufacturer's brochure. Right-click to open the PDF in a new window or download it: Labstrong FiStream III Water Still