Gas Chromatograph

N663

Buck Scientific 910

Price is for base unit, without detector(s). Below are prices to add for various detectors. In the lab, the Buck Scientific 910-series GCs perform routine industrial analyses and complicated research separations easily, generating accurate and reproducible results. Designed to be durable and portable, the compact 310-series is ideal for operation in the field, E.P.A. and A.S.T.M. methods can be easily performed on-site, even in adverse field environments. Use the 910 & 310 and obtain quality results. A GC with the versatility to meet your lab's specific needs. The unique architecture of the Buck GC systems allow various detector and injector combinations, so each GC can be configured to meet your specific lab requirements. The full-size 910-GC can accommodate multiple injectors and detectors for multi-functional applications, while the smaller 310-GC is equally flexible for portable and field analysis. Automated Analyses_ let the GC do the work so you don't have to -The Buck 910/310 offer total control of application parameters using PeakSimple software. PeakSimple allows unlimited temperature programming, electronic pressure control, carrier gas pressure, gas valve position, gas solenoid actuation, autosampler control and other options. Just program your application parameters into the computer and let the 910 do the rest. Optional dual column ovens for multi-dimensional chromatography. Programmed oven temperatures from 50C/min up to 300C and 20C/min from 300C to 450C Peak Simple Software for Windows with built-in 4 channel serial data system Fast cool oven from 400C to 50C in less than 5 minutes for increased sample throughput Electronic pressure controls (EPC) maintains flat baselines over full temperature range, with highly stable retention times Performs research quality analyses under rigorous lab or field conditions Over 12 different detector options to choose from for optimal measurement results There are Nine (9) specific detectors available for the Buck 910 GC system. The larger 910-GC can accommodate up to FOUR (4) of these assorted detectors, either in series (from non-destructive to destructive) or in parallel (using a split stream) Detectors: 1) TCD (Thermal Conductivity Detector) USD$1995/CAD$2394 A "universal" detector able to measure almost ALL molecules; inorganic and permanent gases as well as organic vapors. Operates below 275oC, and gives a typical DL of ~250PPM, with linearity to ~100% for most species. A good nondestructive detector for general Organic and Analytical testing, it is also used for Combustion Gas and Stack Gas testing, Atmospheric monitoring, and bulk measurements. Helium is the recommended carrier. 2) FID (Flame Ionization Detector) USD$1995/CAD$2394 Commonly used for Organic analyses, it is specific for Hydrocarbon species with a working range from ~10PPM to 10% for C1-C10 compounds. It has a high temperature range, over 400oC, and can be interfaced with add-on detectors for selective-species measurements. Solvent and material characterization, environmental samples, TPH and petroleum analyses are primary applications. Air & Hydrogen are support gases, using Helium for a carrier gas. 3) DELCD (Dry Electro-Lytic Conductivity Detector) USD$3995/CAD$4794 This detector, with FID, is ideal for environmental applications where Halogenated Hydrocarbons and Pesticides can be easily differentiated from Solvent matrix backgrounds. Cleaner and more linear response of DELCD compared to ECD still gives sensitivities in the 10PPB range; and meets most EPA specifications for the 600- and 8000-series methods. Works best using Helium for a carrier, with Air & Hydrogen as supplemental gases. 4) HID (Helium Ionization Detector) USD$3495/CAD$4194 Provides "universal" detection; and is non-destructive, similar to TCD; for gaseous species with an Ionization Potential below that of Helium. Less expensive than similar detectors; it provides DLs of ~1-10PPM for most gases. Suited for special tests; such as Transformer Oil Gases, Road Bed Emissions and other non-Organic vapor measurement. High-quality Helium is required as Carrier. 5) NPD (Nitrogen Phosphorus Detector) USD$2995/CAD$3594 Designed for Agricultural and Drug testing, this modified Thermionic Bead Detector responds to Nitrogen-bearing compounds to concentrations of ~100PPB or lower; with Phosphorus-containing materials detectable at ~500PPB. As part of an FID assembly, it needs the Air-Hydrogen jet to burn the eluting "peak" with a Helium carrier. 6) ECD (Electron Capture Detector) USD$5995/CAD$7194 Originally designed for single PPB level detection of Chlorinated organic compounds, it requires a special carrier gas of Argon-Methane and low-bleed columns for optimal results Still the most sensitive detector available for the environmental monitoring of Halocarbons and Pesticides, with 1-5PPB detection limits. Usually run independent of other detectors. 7) PID (Photo-Ionization Detector) USD$3495/CAD$4194 A high-intensity "UV" source, the 10.6eV Krypton Lamp generates powerful energy to "excite" UNSATURATED organic; such as Aromatics, Olefins, Ketones and Esters. The low 10-50PPB DLs for the Aromatic compounds make it ideal for environmental testing for BTEX, PAH and PNA species. Non-destructive measurements make it ideal for use with an FID/combo detector. 8) FPD (Flame Photometric Detector) USD$3995/CAD$4794 Employs either a single- or double-phototube detector that "sees" the light from burning Sulfur or / and Phosphorus compounds. Crucial for Stack and Combustion Gas testing,Natural Gas, refined Hydrocarbons and even Pesticide materials. Superior detection limits in the 1-10PPB range are achieved with advance electronics and proprietary optical designs. Uses a rich Hydrogen flame, often used in conjunction with FID and with a Helium carrier gas. 9) CCD (Catalytic Combustion Detector) USD$1195/CAD$1434 A unique and economical alternative to the FID for the detection of hydrocarbon compounds has a typical detection limit of about 500 ppm when run with a helium carrier. The CCD can also run at lower temperatures (<200) when run on air to make a truly self contained GC. 10) FID/DELCD USD$4995/CAD$5994 11) NPD/DELCD USD$5995/CAD$7194 12) FPD/FID USD$4995/CAD$5994 Note: Many of these detectors can be, and often should be combined to maximize the usefullnes of the Buck GC. Packages such as FID-DELCD, TCD-FID, PID-FID- DELCD, NPD-DELCD, FID-FPD. Call for specific application help on your application.

New

110 or 220 Volts,

Thank you for your information request on Labequip stock #N663, Multi-detector system Gas Chromatograph, Buck Scientific 910.
Please contact us for pricing, shipping charges, or a formal quotation...
PHOTOS: These photos are reduced in size for display on the internet. Please contact us if you wish to receive larger, high-resolution images by e-mail. We will also be pleased to provide a close-up of any part of the instrument you specify.