Hood

27560

Forma Scientific 1186 Class IIA, Type B3

The 1186 Series is a Class II, Type A/B3 cabinet. The "Type A/B3" designation indicates two alternative uses of the cabinet. When vented directly into the laboratory room, the unit serves as a "Type A" unit. When vented to the outside atmosphere, through an inhouse exhaust system, it serves as a "Type B3" unit. Either usage of the cabinet offers both personnel and product protection. Clean, filtered air descends through the work zone with approximately 40% being discharged through the exhaust HEPA filter with the remaining air recirculating through the supply HEPA filter into the work area. Exhausted air is replaced by room air entering the system through the front access opening. Room air entering the work zone, through the front access opening, completes the air barrier at the unit face and is responsible for the containment properties of the unit. All work must be performed beyond the intake grille, on the solid work tray. *** Includes certificate of decontamination ***

Used

(inside:) 70"W x 22"D x 30"H (outside:) 76"W x 30"D x 64"H

115 Volts, 60 Hz, 12.0

1

Thank you for your information request on Labequip stock #27560, Laminar Flow, Biohazard Hood, Forma Scientific 1186 Class IIA, Type B3.
Please contact us for pricing, shipping charges, or a formal quotation...
PHOTOS: These photos are reduced in size for display on the internet. Please contact us if you wish to receive larger, high-resolution images by e-mail. We will also be pleased to provide a close-up of any part of the instrument you specify.