|
|
|
TOC Analyzer
|
27492A
|
Shimadzu TOC 5000A with sampler
|
The detection limit of Shimadzu's TOC-5000(A) Series combustion oxidation instruments is 4 parts per billion (ppb), which is similar to the detection limits of wet chemical type TOC analyzers. Furthermore, the Shimadzu TOC-5000(A) series instruments is THE MOST SENSITIVE combustion instrument on the market. The Shimadzu TOC-5000(A) Series instruments are capable of performing analysis on any high sensitivity applications such as pharmaceutical grade, semiconductor grade, steam power, and ultrapure waters, as well as less sensitive application such as drinking water and particulate analysis such as wastewater and industrial effluents, sea water, brines, ground water, and surface water. Includes software and computer, but not the monitor.
Analyte: TC, IC, TOC (TC-IC), NPOC (non-purgeable organic carbon), POC (purgeable organic carbon: option)
Method: Combustion/non-dispersive infrared gas analysis method)
Combustion temperature: 680C
Measuring range: 4ppb to 4000ppm (to 5000ppm for IC) (POC: Max 400ppm)
Average analysis time: 2 to 3 minutes for both TC and IC (4.5 minutes for TC and 3.5 min. for IC at the longest)
Sample introduction: Automatic injection via microliter syringe
Sample injection volume: 500 to 2000uL with a 2500uL syringe, 4 to 250uL with a 250uL syringe
Pretreatment for IC: Automatic sparging function
Carrier gas: Cylinder of ultra-high purity air or oxygen; about 6kgf/cm2 (7kgf/cm2 max.) in supply pressure; 150 mL/min. in flow rate (300mL/min. including sparging)
Data Calculation of concentration using one-point to four-point calibration curve; automatic selection of best calibration curve; store up to 18 calibration curves; automatic exclusion of anomalous value(s) and automatic re-analysis/re-calculation; calculation of standard deviation and coefficient of variation, automatic re-analysis with different measurement range and/or different sample volume when response goes off scale.
Other features: Automatic selection of the optimum set of operation conditions; maintenance/self-diagnostics, warning of abnormality; timer for restarting from the running mode.
|
Used
|
100/127 Volts, 50/60 Hz, 800vA max
|
1
|
|
Thank you for your information request on Labequip
stock #27492A, TOC Analyzer, Shimadzu TOC 5000A with sampler.
Please contact us for pricing, shipping charges, or a formal quotation...

PHOTOS: These photos are reduced in size for display on the internet. Please
contact us if you wish to receive larger, high-resolution images by e-mail.
We will also be pleased to provide a close-up of any part of the instrument
you specify.
|
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
|
|
|