Incubator

25659

Forma Scientific 4535

The Forma 4535 shaking incubator is a microprocessor controlled, incubator orbital shaker designed to accommodate a wide variety of flasks, test tubes and other glassware. The control system is easily programmed and stores up to three user-defined combinations which may be used or edited at the operator's discretion. These set programs remain in memory even when the shaker is turned off and unplugged. The values set by the factory for the pre-set programs are: 1. P1 Time: 720 minutes (12 hours) Countdown Mode; RPM: 250; Temp: 35C 2. P2 Time: 1200 minutes (20 hours) Countdown Mode; RPM: 300; Temp: 28C 3. P3 Time: 00:00H Hold Time (accumulated) Mode; RPM: 100; Temp: 35C Shaking Range: 25-525 RPM Accuracy: +/-1 RPM Motion: One inch/orbital Temperature Range: 5C above ambient to 60C (140F) Control: +/-0.1C Uniformity: +/-0.2C (in flask) Timer: Periods Programmable from 5 min. to 199 hours 59 minutes or continuous operation Indicator LCD in 1 minute increments Run Time Display counts down for a timed run or counts up in a "hold" function Alarms: Temperature Adjustable tracking high/low temp RPM Adjustable tracking high/low RPM Time Run complete Power Fail Message displayed on LCD screen Includes platform as shown in photos. Clamps may be available used from stock at additional cost.

Used

(inside:) 34"W x 21"D x 13"H. (outside:) 45"W x 27"D x 39"H

115 Volts, 60 Hz, 8.6A

1

Thank you for your information request on Labequip stock #25659, Shaking Incubator, Forma Scientific 4535.
Please contact us for pricing, shipping charges, or a formal quotation...
PHOTOS: These photos are reduced in size for display on the internet. Please contact us if you wish to receive larger, high-resolution images by e-mail. We will also be pleased to provide a close-up of any part of the instrument you specify.