Bath

22672

Ertco TCS-200-35

Developed to meet the regulatory requirements of state and federal agencies for verified, calibrated measuring instruments in the laboratory and on the manufacturing floor, Ertco Thermometry Calibration Systems can be used with liquid-in-glass, bimetal, thermistor, thermocouple and RTD thermometers. FROM THE MANUFACTURERS LITERATURE: The model TCS-200-35 has a 13L bath and a temperature range of -35 to +200C. Features a programmable microprocessor and an alphanumeric LCD menu so you can conduct simple time/temperature studies. Temperature readings can be displayed in either C or F to the nearest 0.1, 0.01, or 0.001Deg. Readout accuracy, +/-25C; stability, +/-0.01C. Units can simultaneously display both the set and actual fluid temperature. Audible and visual alarms alert you when fluid temperature deviates beyond selected high and low limits. A backup system stores your settings, so they are not lost in the event of a power loss. The bath is stainless steel with a duplex pump for open-tank or closed-loop circulation and a 1000w heater. A turntable rack provides room to hold up to 10 thermometers. Supplied with an RS-232-C computer interface and easy-to-use software for conducting more complex temperature studies with your PC. A jack for connecting a remote probe allows temperature control in a remote instrument.

Used

(inside:) 11"W x 11"L x 6"deep (outside:) 16"W x 17"D x 26"H

120 Volts, 60 Hz, 12A

1

Thank you for your information request on Labequip stock #22672, Calibration Bath, Ertco TCS-200-35.
Please contact us for pricing, shipping charges, or a formal quotation...
PHOTOS: These photos are reduced in size for display on the internet. Please contact us if you wish to receive larger, high-resolution images by e-mail. We will also be pleased to provide a close-up of any part of the instrument you specify.