Evaporator

22078

Organomation S-Evap-KD Model 120

Includes some accessories but no glassware. Bath external dimensions: 11" H x 19" diameter. 8 x 4" diameter places (for 125ML, 250ML or 500ML Kuderna-Danish flasks: not included). Requires individual solvent collection glassware, central solvent collection glassware and inverted Hopkins condensers: available from manufacturer at an extra cost. Instrument has been priced to reflect lack of glassware and the fact that the customer will have to purchase such. The instrument consists of a base and stand assembly, mounted in a deep bath. The entire instrument rotates so that all samples are accessible from the front. Kuderna-Danish flasks sit on a cover disk with attached concentrator tubes immersed in the bath water. Solvents with boiling points up to 65C can be handled. For maximum beat transfer, jar shaped flasks can be immersed directly into the bath water. An optional vacuum manifold permits solvents with boiling points up to 90C to be processed. The condenser water supply includes a flow inner, rigid supply tube, rotating inlet/drain port, parallel supply/return manifolds and a flexible return tube. Quick-disonncct fittings are used on the manifolds The system can be connected to a bench coldwater tap. A refrigerated water chiller is recommended as an accessory for improved control of condenser temperature and water conservation. The 8.5-inch deep, stainless steel water bath is thermostatically controlled and will accurately maintain water temperature from 30C to 100C. It is equipped with a water level device, a high temperature limit switch and a GFCI electrical plug for safety. An intrinsically safe, purged case is available as an option. Choice of two solvent collection methods: Individual flasks at each condenser or one large central flask with tubing and fittings. Glassware (not included) is easily loaded and removed. Water manifold uses quick-disconnect fittings for easy set up and removal of condensers.

Used

(inside:) BATH: 8"D x 16" diam (outside:)

110 Volts, 50/60 Hz, 1100W

1

Thank you for your information request on Labequip stock #22078, Solvent Evaporator, Organomation S-Evap-KD Model 120.
Please contact us for pricing, shipping charges, or a formal quotation...
PHOTOS: These photos are reduced in size for display on the internet. Please contact us if you wish to receive larger, high-resolution images by e-mail. We will also be pleased to provide a close-up of any part of the instrument you specify.