Spectrophotometer

N607

Hanna Instruments HI 9828

HANNA's new HI 9828 is a multiparameter portable instrument that monitors up to 13 different water quality parameters (6 measured, 7 calculated). The meter has a 128 x 64 pixel dot matrix backlit LCD that automatically sizes the digits and allows full configuration of each parameter measured, units and language selection, and on-screen graphing. Each parameter is fully supported by the on-screen context sensitive help both in the calibration mode and during measurement. For monitoring and recording data, HI 9828 is equipped with HANNA's exclusive T.I.S. - Tag Identification System: iButton¸s with unique ID numbers can be installed at various sampling sites and are used to record specific location information when logging. The meter incorporates comprehensive GLP features, and download of data is done via USB connectivity. Designed for outdoor environments, the meter is impact resistant and waterproof to IP67 standards (30 minutes immersion under 1 m of water). The multi sensor probe can be left underwater (IP68 standard). For field calibration, HANNA's Quick Calibration allows the user to standardize pH, conductivity and oxygen with one solution. HANNAs HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifiers that convert the high impedance signals from the sensors of the probe eliminating common problems associated with high impedance signals such as limitation of cable length and noise. This allows the probe to have reliable communication with the meter and the user is immediately warned of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available. The probe also features HANNA's Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple, step. Dissolved Oxygen is also calibrated in a single step in saturated air. The probe houses 7 of the 8 measured parameters: pH, pH mV, ORP, EC, Absolute EC, % saturation and mg/L (ppm) oxygen, and temperature. The sensors are all replaceable independently and are easy to maintain and keep clean, and are protected by the outer PVC/stainless steel sleeve and cap, suitable for use in 2"wells. The probe housing is rated IP68 standard. Price is for Multiparameter water quality meter with HI 769828 DO/EC/pH/ORP/T probe with 4m cable, HI 9828-25 quick calibration standard solution, 500ml, probe maintenance kit, 4 rechargeable C size Ni-MH batteries, power adapter & cable; car 12V accessory outlet adapter, (5) iButtons with holder, HI 7698281 USB interface cable, HI 92000 Windows compatible software and instruction manual in a rugged carrying case. Longer cable is available

New