Oxygen Analyzer

23390

Teledyne TED 60T

The Teledyne 60T Oxygen Analyzer provides analysis in respirators, incubators, and other medical equipment where specific monitoring of oxygen is vital. The unit is compact, light, fits comfortably in a pocket, and incorporates a belt clip for easy carrying. Its 9-volt battery lasts about one year in normal service. The TED 60T utilizes the Class T-7 Micro-Fuel Cell specifically designed for medical applications. The sensor is a self-contained galvanic cell with a 90% response time of typically 6-8 seconds at 5 liters/minute and a life expectancy of 10 months in 100% oxygen (continuous). Replacing the sensor is as easy as unclipping the old sensor and snapping on a replacement. The low-cost sensor also has an excellent shelf life that makes keeping spares a sensible proposition. Includes oxygen sensor - STRICTLY AS-IS. The TED 60T incorporates a combination of important features. The liquid crystal display (LCD) provides an easy-to-read indication of the oxygen content of the gas being monitored, with a resolution of 1% oxygen. The upper left-hand corner of the LCD indicates "BAT" when the batteries are low. Located on the top panel of the monitor are the ON/OFF power switch and the calibration control button. The battery is located in the back beneath a sliding cover. The TED 60T is designed to analyze oxygen concentrations in a variety of medical gas mixtures. This instrument should never be used as a primary monitoring device. It is recommended that the instrument only be used as a secondary measuring device to verify and spot check the concentration of oxygen in gas mixtures prepared using a gas blender, anesthesia gas machine, or similar apparatus. The unit may be used for verifying oxygen concentrations in gas mixtures used in: Ý Anesthesia Ý Respiratory Therapy Ý Neonatal Care Ý Intensive Care

Used

1