QUOTATION REQUEST FORM
Solvent - Evaporator - Organomation S-Evap-KD Model 120

Summary of Item Description

Type:

Solvent

Item:

Evaporator

Stock #:

22078

Make / Model:

Organomation S-Evap-KD Model 120

Description:

Includes some accessories but no glassware. Bath external dimensions: 11" H x 19" diameter. 8 x 4" diameter places (for 125ML, 250ML or 500ML Kuderna-Danish flasks: not included). Requires individual solvent collection glassware, central solvent collection glassware and inverted Hopkins condensers: available from manufacturer at an extra cost. Instrument has been priced to reflect lack of glassware and the fact that the customer will have to purchase such. The instrument consists of a base and stand assembly, mounted in a deep bath. The entire instrument rotates so that all samples are accessible from the front. Kuderna-Danish flasks sit on a cover disk with attached concentrator tubes immersed in the bath water. Solvents with boiling points up to 65C can be handled. For maximum beat transfer, jar shaped flasks can be immersed directly into the bath water. An optional vacuum manifold permits solvents with boiling points up to 90C to be processed. The condenser water supply includes a flow inner, rigid supply tube, rotating inlet/drain port, parallel supply/return manifolds and a flexible return tube. Quick-disonncct fittings are used on the manifolds The system can be connected to a bench coldwater tap. A refrigerated water chiller is recommended as an accessory for improved control of condenser temperature and water conservation. The 8.5-inch deep, stainless steel water bath is thermostatically controlled and will accurately maintain water temperature from 30C to 100C. It is equipped with a water level device, a high temperature limit switch and a GFCI electrical plug for safety. An intrinsically safe, purged case is available as an option. Choice of two solvent collection methods: Individual flasks at each condenser or one large central flask with tubing and fittings. Glassware (not included) is easily loaded and removed. Water manifold uses quick-disconnect fittings for easy set up and removal of condensers.

New / Used:

Used

Dimensions:

(inside:) BATH: 8"D x 16" diam (outside:)

Electrical:

110 Volts, 50/60 Hz, 1100W

Available:

1

Please fill out this 'Quotation Request Form' below. **Denotes required fields
NOTE: Your information is only required once per visting session. However, this requires cookies to be enabled in your browser settings, otherwise you will need to repeat this step for any additional requests.

Title:

Dr.	Mr.	Ms.	Prof.

First Name:

Last Name:

Organization:

Department:

Address:

City/Town:

Prov/State:

Postal /Zip Code:

Country:

Telephone:

For example, country code for USA/Canada is 01

Country	Area	Number	Ext.
			**

Fax:

Country	Area	Number	Ext.

E-mail:

If you do not see the "Thank you" page after you submit your request, there may be problem with the server. If this happens, please send us a direct email to info@labequip.com

HOME

CATALOG

LABEQUIP LTD.® 35-330 ESNA PARK DRIVE, MARKHAM, ONTARIO, CANADA L3R 1H3 Tel: 905.475.5880 Fax: 905.475.1231