Cress Manufacturing C1228/PM6 Benchtop Furnace

Condition: New Brand new item from stock or on order from manufacturer
1 YEAR MANUFACTURER'S WARRANTY
Stock #:
N1584
Dimensions (approx.):
12 x 20 x 8 in.H (inside)
25 x 34 x 28 in.H (outside)
Product Description
Heat treat (Hardening) furnaces have higher heat output power than draw furnaces due to the elevated temperatures at which they operate. Heat transfer to the tool steel is accomplished by a very efficient process called direct radiation. Temperature uniformity in these furnaces is best in the red heat range. Normal maximum temperature is 1232°C (2250°F). Optional 1316°C (2400°F.) maximum temperature versions are available (inquire for pricing).
These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300°F to 2250°F ±25°F are required. They are used for heat treating metal, assaying and all types of testing. 2400°F maximum temperature option available at additional cost.

Temperature Controls: Auto tuning microprocessor-based controller.
Heating elements: Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates.
General construction: The furnace case is constructed of heavy gauge sheet steel and finished in gray hammertone. The walls and door are constructed of the finest quality insulating fire brick backed up by 1800°F block insulation.
Safety switch: These models come equipped with dual door safety Switches. when the door is opened, power is disconnected from the heating Elements.
Door: The counter balanced easy to operate door, opens up and away from the furnace, keeping the hot side away from the operator.

SPECIFICATIONS:
~ Chamber Width: 12 in.
~ Chamber Length: 20 in.
~ Chamber Height: 8 in.
~ Overall Width: 25 in.
~ Overall Length: 34 in.
~ Overall Height: 28 in.
~ Max. Intermittent Temperature: 2250°F
~ Max. Continuos Temperature: 2000°F
~ Input Power: 8 kW
Options:
~ Embedded elements and Clean air exhaust system
~ High limit control
~ Inlet port for protective inert Atmosphere
~ Stands and quench tanks
This model is not programable; it is a single set point controller with a soak timer. If you need a programable controller you can upgrade to: PM4 (ask your sales rep for pricing).
Made in USA.
This item ships from Carson City, NV.
Looking for a specific close-up? Contact Us
Request a Free Quote Right Now
Please fill in the form below to get a quote for the Cress Manufacturing C1228/PM6 Benchtop Furnace:
Captcha
 

Categories

Analytical Instruments / Chemistry lab apparatus
chromatographs, calorimeters, evaporators, fluorometers, hydrogenators, osmometers, polarimeters, spectrophotometers, titrators, meters for pH / conductivity / dissolved solids / ORP ... and much more...

Biology / Microbiology laboratory apparatus
bioreactors, cell disrupters, cell harvesters, cryostats, digesters, freeze-dryers / lyophilizers, growth chambers, homogenizers, hybridization, incubators, microscopes, osmometers, spiral platers, sterilizers ... and much more ...

General Use laboratory apparatus
balances, baths, blenders, centrifuges, chart recorders, freezers, fume hoods, furnaces, glassware washers, glove boxes, mixers, moisture testing, ovens, pumps, shakers, vacuum equipment, water purification ... and much more ...

Medical / Clinical laboratory apparatus
anaerobic incubators, autoclaves, blood testing, cell counters, CO2 incubators, cryostats, electrolyte analyzers, electrophoresis, glove boxes, microtomes, sterilizers, ... and much more ...

Petroleum Products and Biofuel lab apparatus
baths, calorimeters, color measurement, density meters, flash point, hydrogenators, oil testing, penetrometers, surface tension, vapor pressure, viscometers and rheometers, ... and much more ...

Pharmaceutical laboratory apparatus
stability chambers, tablet disintegration, tablet dissolution, tablet hardness, V-blenders, ... and much more ...

Materials Testing / Physical Properties / Metallurgical lab apparatus
abrasion, color measurement, environmental chambers, gloss / reflectance, hardness, impact testers, melt point, particle size, paint testers, penetrometers, sieve shakers, tensile strength, viscometers ... and much more ...